Frequently Asked Questions about Making Marimbas and Xylophones…
Is my homemade instrument going to sound as good as commercially available instruments?
I'm not going to suggest that you can build an instrument which will sound identical to the commercially available instrument, not with basic wood that you can get from the hardware store. PLUS this instrument is only two octaves, and most commercial instruments are four octaves. However - have a listen to this sample, and you'll see that there is very little difference between the sound quality. My prototype was made from standard Durian Hardwood - and if you were to use a better timber you'd achieve an even better sound quality
Listen to the the prototype instrument constructed and photographed on this page
|
Do I need special wood for the bars?
The great thing about this project is that it will work for you, no matter what wood you have available
Concert quality instruments are usually made from Honduras Rosewood or African padouk, and obviously the better wood you have access to the better instrument you’ll be able to make. However you can make this instrument from just about any hardwood (eg, Oak, Durian or Meranti).
How much will the materials Cost?
Depending on where you live you should be able to get all the materials you need for between $350 - $450, from the local hardware or wood supply store.
If you wish to make a better quality instrument you can of course invest in a better quality wood, such as Rosewood. This will cost you a few hundred dollars, but will still be way less than purchasing a real concert instrument.
Does the plans include both Metric and Imperial Measurements?
As from March 2008, YES! I've updated the plans so that they include both imperial (feet and inches) and metric (millimetres) measurements. There is also a conversion table included.
Do I need to be good at woodworking to achieve this?
Absolutely not! I’m not a carpenter - I’m a musician. Most of the skills required are fairly basic woodwork – measuring, cutting and sanding.
Even if you’ve hardly ever picked up a hammer or a saw in your life I’m confident that you’ll be able to achieve a workable instrument using these plans.
Do I need lots of expensive tools?
Most of the tools you need are commonly available
All you need is:
- An electric drill with a sanding attachment
- A screwdriver
- A wood saw
- A small hammer
- Sandpaper and sanding discs
- Hacksaw
- Rivet Gun
Plus a few other bits and pieces commonly found around the garage!
Do I need any special tuning equipment?
A basic electronic tuner is highly recommended. Any chromatic tuner will do the job, and you can get a really basic electronic tuner from any music store for between $50 - $100, or simply borrow one from a friend to get the job done!
These tuners are incredibly common – nearly all professional musicians or music teachers either own one or have a friend who owns one.
If you don’t have access to one, don’t worry – as I’ve included a full set of sine waves (clear and clean tones) that you can use to tune the notes by ear. If you have a musical ear it is really easy to do it this way.
Does it matter what the resonators are made out of?
This is one of the biggest LIES that are told to you by the instrument manufacturers…
…that it really matters what the resonators are MADE FROM
The fact is that it makes very little difference!
Think about it......The resonators job is to amplify the sound – and it does this by containing a column of air which is the correct size to resonate when sound waves from the bar enters it.
Does the column of air really care what is containing it? or does it even know? Remember it’s the column of air that is vibrating.. not the container, so it really can’t make any difference!
The plans included for this marimba use PVC pipe for the resonators because:
- They are lightweight
- They are inexpensive
- They are easy to work with
- They don’t require heavy duty hardware to hold them in place
And you can get PVC pipe at just about any hardware store, as it is usually used for drainpipes around just about any home! If you really want to use another material you can do so of course, but you may have to adapt the plans to cope with a heavier material.
Do I have to wait for anything to be shipped to me?
Absolutely not! You’ll get instant access to the e-book and videos via download, so that you can get started immediately. The plans print out in Adobe Acrobat Reader (which nearly every computer already has installed).
How Much do these plans Cost?
I’ve made these plans available to you for just $39.95 Australian Dollars, through my e-commerce partner the Fun Music Company. You can go to www.xe.com and check it out in your currency.
So, together with approx $200 for materials, you can build this instrument for under $250…
$34.95 for the plans is not much at all when you consider:
- The length of time that I had to study acoustics in order to bring these plans to you
- The trial and error that I went through in designing frames, tuning bars and resonators and selecting materials, that you don’t have to!
- The near impossibility of finding this information out through other sources – I looked through hundreds of books on the subject – and I couldn’t find the practical, necessary information needed to just build a marimba myself.
So go ahead right now and click here to get instant access to the building Plans for the Two Octave Mini Marimba
|
